KDS Anlagen

Dynamic power factor correction systems KDS are ideal for small to large scale businesses. They are easy to install and require little service and are paid back very quickly. Each year you will save energy cost with this system and also reduce CO2. At the same you increase the utilization of your electrical infrastructure and more active energy can be transmitted and used. For very dynamic loads like in elevators, saws and other machines this electronic dynamic compensation is ideal. The quick response time of less than 15ms allows to efficiently eliminate flicker.

Design and equipment

Dimensions	2100x800x600mm [HxWxD] (max. 300kvar)
Installation	Cabinet
Weight	≈ 325kg (300kvar)
Connection	Below or above, three (3L-PE) or four (3L-N-PE) wire
Display	7” LCD
Line fuse	onsite
Current transformer	onsite, transformer ratio …/5A neededInstallation Grid- or Loadside possible Per phase a current transformer is needed (3 pcs.)

 

Technical specifications

Voltage	400 V ±15%
Frequency	50 or 60Hz (± 10Hz, no floating)
Size	144, 288 or 432A (100, 200 or 300kvar)
Harmonic correction	2. to the 25. limited possible
Power factor correction	Capacitive and inductive (selectable)
Load balancing	Between two phases and between phase and neutral
Response time	≤10ms
Operating temperature	-15°C to +40°C without derating