Ablerex APF-Modular
General
Ablerex Enersine active filters can correct any type of harmonic contamination to protect the system from faults (e.g. burnt-out transformers, damaged capacitors, etc.), while also improving the power factor.
The power modules of the modular version are easy to install and are hot swappable:
they can be replaced while the filter is operating.
Design and equipment
Technical specifications
Ablerex Enersine active filters can correct any type of harmonic contamination to protect the system from faults (e.g. burnt-out transformers, damaged capacitors, etc.), while also improving the power factor.
The power modules of the modular version are easy to install and are hot swappable:
they can be replaced while the filter is operating.
Design and equipment
| Dimensions | 1500x600x900mm [HxWxD] (max. 400A) 1950x600x900mm [HxWxD] (max. 600A) |
| Installation | Schrank |
| Weight | 150kg ohne APF Module (1500mm hoher Schrank) 196kg ohne APF Module (1950mm hoher Schrank) |
| Connection | Below, three (3L-PE) or four (3L-N-PE) wire |
| Display | 7” LCD |
| Line fuse | onsite |
| Current transformer | onsite, transformer ratio …/5A suggested, …/1A possibleInstallation Grid- or Loadside possiblePer phase a current transformer is needed (3 pcs.) |
Technical specifications
| Voltage | 400 V +15%, -20% |
| 480V +10%, -20% | |
| Frequency | 50 or 60Hz (± 3Hz) |
| Size | 60, 80 or 100A APF modules can be used together as required. |
| Harmonic correction | 2. to the 51. |
| Power factor correction | Capacitive and inductive (selectable) |
| Load balancing | Between two phases and between phase and neutral |
| Response time | 25µs |
| Operating temperature | -10°C to +40°C without derating |